Fanvil

Setting up a Fanvil SIP phone through the phone’s local http management portal.

  • Factory reset the phone (physically on the phone) by pressing menu button > Settings > Advanced Settings (default password is 123) > Reset to Default > Press yes to continue.
  • Press Menu > Status to get the phones ip address
  • Open a web browser and enter the phones ip address
  • Default login name and password is admin
  • Top menu click Auto Provision

Common Settings

  • Fill out the fields:
    • Authentication Name: http user name that was set in FusionPBX default settings
    • Authentication Password: http password that was set in FusionPBX default settings
    • Save Auto Provision Information: Check the box
    • Download CommonConfig enabled: Check the box
    • Download DeviceConfig enabled: Check the box

Static Provisioning Server

  • Fill out the fields:
    • Authentication Name: http user name that was set in FusionPBX default settings
    • Server Address: https://domain.tld/app/provision
    • Protocol Type: HTTPS
    • Update Mode: Update after Reboot
  • Click Apply
../../_images/fusionpbx_provision_auto_fanvil.jpg
  • Left side menu click System
  • Top menu click Tools
  • Scroll to the bottom and click Reboot
../../_images/fusionpbx_provision_auto_fanvil1.jpg

Self Signed Certificates

If you are going to use a self signed certificate you will need to adjust additional settings.

  • Left side menu click Phone settings
  • Top menu click Trusted Certificates
  • CA Certificates: Disabled
  • Click Apply
../../_images/fusionpbx_provision_auto_fanvil2.jpg